Agitator & {Cement Truck} Electrics
Running a concrete agitator or ready-mix truck means the electrics have to keep up — drum and cab controls, radio remotes, wiring looms, lighting and cameras that take a hard day’s work. BMC Auto Electrical looks after agitator and cement truck auto electrical work from our workshop in Warana, and with mobile service for heavy vehicles across the Sunshine Coast.
We install, fault-find and repair Woodtech agitator control systems, including the Promix SD Standard Transit Mixer Radio Remote Control System, plus the broader truck electrics that keep your mixer reliable on site and on the road.
Call 07 5208 9307 to book workshop or mobile heavy-vehicle support.
What we do for {agitator & cement trucks}
At BMC we can help with:
- Woodtech agitator control systems — install, fault finding, repairs and changeovers
- Promix SD radio remote systems — plant mix, discharge / mix, chute up / down, engine speed, and cabin / remote modes
- Drum controls — electrics that drive mixer drum operation
- Cab controls — switches, modules and in-cab control interfaces
- Wiring looms — repair, rewiring and tidy loom work suited to heavy truck use
- Lighting — work lights, marker and safety lighting for trucks and plant
- Cameras — reversing and work-area camera installs where needed
- Broader auto electrical diagnostics and repairs on concrete agitator, cement and ready-mix trucks and fleets
If a control system or remote is playing up, or you’re upgrading gear on an agitator, tell us the symptoms and the truck — we’ll diagnose properly rather than guessing at parts.
Woodtech {Promix SD} control systems
Promix SD from WoodTech Electronics is a standard transit mixer radio remote control system used on agitator and cement trucks. Typical Promix SD functions operators rely on include:
- Plant mix
- Discharge / mix (including travel high-speed mix where fitted)
- Chute up / chute down
- Engine up / engine down (engine speed)
- Cabin / remote mode selection
- Halt / resume and stop functions on the handheld remote
BMC Auto Electrical installs, fault-finds and repairs Woodtech Promix SD systems and related agitator electrics for Sunshine Coast operators — cabin units, handheld remotes, wiring and the circuits that tie drum, chute and engine controls together.
We are auto electricians who work on heavy vehicles and plant. We do not claim to be an official Woodtech dealer or distributor. If your job needs specific Woodtech parts or software support, we’ll tell you what’s involved and source or coordinate what’s required for a proper repair or install.
Vehicles & {fleets} we support
We work on:
- Concrete agitator trucks
- Cement and ready-mix mixer trucks
- Related fleet trucks used by concrete and construction operators
Jobs can be booked into the Warana workshop or arranged as mobile auto electrical support for heavy vehicles when that suits the fleet.
Why choose {BMC Auto Electrical}
- 20+ years auto electrical experience on the Sunshine Coast
- Heavy vehicle and plant experience — trucks, machinery and fleet work
- Workshop at 1/30 Technology Drive, Warana QLD 4575
- Mobile auto electrician support for heavy vehicles when the truck can’t easily come in
- Straight advice on control systems, remotes, wiring and related truck electrics
- Same team that covers general auto electrical, batteries, air conditioning and accessories
Service areas — {Sunshine Coast}
We’re based in Warana and regularly look after customers from: Warana · Kawana · Caloundra · Mooloolaba · Maroochydore · Buderim · Sippy Downs · Nambour · Coolum · Noosa / Sunshine Beach and surrounding suburbs — including fleet yards and job sites across the Coast.
Workshop hours: Monday–Friday, 7:00–15:00. Call ahead for heavy or mobile bookings.
Common agitator & {Woodtech} questions
Do you work on Woodtech Promix SD systems?
Yes. We install, fault-find and repair Woodtech Promix SD radio remote control systems for transit mixers / agitators, including cabin units, handheld remotes and related wiring. We’re auto electricians — not an official Woodtech dealer — and we’ll be clear about parts and scope before work starts.
What does the Promix SD remote control?
Typical Promix SD controls cover plant mix, discharge / mix, chute up / down, engine speed (engine up / down), cabin / remote modes, plus halt / resume and stop on the handheld remote. Exact layout can vary by truck and install — bring the truck or remote in and we’ll check it.
Can you help if the drum, chute or remote is intermittent?
Often yes. Intermittent drum, chute or remote faults can be wiring, connectors, switches, the cabin unit, the handheld remote or the wider control system. We diagnose from the symptoms and the truck, then repair or replace what’s needed.
Do you rewire agitator trucks?
Yes. We repair and rewire looms and related circuits for agitator and cement trucks when damage, age or upgrades require it.
Do you fit lighting and cameras on cement trucks?
Yes. Work lights, marker/safety lighting and reversing or work-area cameras are part of the truck electrics we look after.
Do you come to the yard, or does the truck need to come to Warana?
Both options. Many jobs suit our Warana workshop. For heavy vehicles we also offer mobile auto electrical support when it makes more sense to work at the yard or site. Call 07 5208 9307 to arrange.
Where are you and when are you open?
BMC Auto Electrical, 1/30 Technology Drive, Warana QLD 4575. Monday–Friday 7:00am–3:00pm. Phone 07 5208 9307 or email [email protected].
Book agitator or {cement truck} electrics
Don’t leave a mixer truck parked up because of a control, remote or wiring fault. Get Woodtech Promix SD and agitator electrics checked by auto electricians who work on Sunshine Coast heavy vehicles.
Call BMC Auto Electrical on 07 5208 9307
1/30 Technology Drive, Warana QLD 4575
Mon–Fri 7:00–15:00 · [email protected]
Or message us via the contact form.