1/30 Technology Drive
Warana QLD 4575
07 5208 9307
Call BMC

Autowatch Ghost-II and Autowatch Ghost III official marks

Supply and professional installation of Ghost 2 and Ghost 3 at BMC Auto Electrical, Warana.

BMC Auto Electrical supplies and professionally installs Ghost immobilisers — including Autowatch Ghost, Ghost 2 (Ghost II) and Ghost 3 (Ghost III) — from our workshop at 1/30 Technology Drive, Warana, on the Sunshine Coast. People across Australia search for a Ghost immobiliser when they want more than the factory system that came with the key; this is the local workshop that can quote and fit the unit that suits your vehicle.

A Ghost immobiliser is a covert CAN-bus anti-theft device. There is no extra PIN pad on the dash, and a standard install does not add a key fob that can be cloned or left lying around. After it is fitted, you enter a unique sequence on buttons already in the vehicle — typically on the steering wheel, a door switch or the centre console — before the vehicle will drive.

Call 07 5208 9307 (0752089307) with the make, model and year and we will check whether Ghost 2 or Ghost 3 is the right system, then quote the supply and professional installation.

Monday–Friday, workshop 7:00am–3:00pm, phones 7:00am–6:00pm · 1/30 Technology Drive, Warana QLD 4575


Auto electrician at a car in the BMC Auto Electrical Warana workshop, where Ghost immobilisers are supplied and professionally installed
Dashboard and interior trim removed on a car during electrical work at BMC Auto Electrical, Warana

How a Ghost immobiliser works

The Ghost system talks to the vehicle over the data network and immobilises it through the ECU, rather than adding a visible alarm box or a keypad. That is why it is often described as a stealth or covert immobiliser. Ghost 2 and Ghost 3 both work this way; the difference is the type of vehicle network they support (see Ghost 2 vs Ghost 3 below).

  • You set a unique, changeable PIN sequence using existing buttons in the car — typically from a few presses up to around twenty
  • There are no radio-frequency signals for a thief to jam or copy on a standard PIN install
  • There are no LED indicators to show that the system is there
  • The module is compact and installed out of sight, usually hidden in the vehicle’s wiring
  • A service / valet mode lets you hand the vehicle over without sharing your sequence
  • Every unit has a unique emergency code if the sequence is forgotten

Once the system is armed, switch the ignition on, enter your sequence, wait for the confirmation, then start and drive as normal. You can change the sequence later.

Factory steering wheel control buttons used to enter a Ghost immobiliser PIN sequence

Ghost 2 vs Ghost 3 — which system suits your vehicle

Ghost 2 (also searched as Ghost 2 immobiliser, Ghost II immobiliser or Autowatch Ghost 2) is the Autowatch CAN-bus system most people in Australia still look up. It uses a single CAN network and covers a wide range of vehicles.

Ghost 3 (Ghost III) is the current-generation unit. Official Autowatch material describes it as an all-new platform with high-speed CAN-FD support, dual CAN networks, a new high-speed processor and lower power consumption. Ghost 2 does not support CAN-FD, so some newer vehicles — often from around 2024, where the car uses that faster network — need Ghost 3 instead. Dynamco, which operates as Ghost Australia, also states that Ghost 3 is now available.

Ghost 3 can immobilise in more than one way, depending on the vehicle: digital blocking over CAN, LIN-bus integration where that is used, and traditional analogue circuit cuts when they are needed. Authorisation is still a PIN on the factory buttons as standard, with optional key-tag or smartphone setups on some installs. Service / valet mode and an emergency code are part of both systems.

Tell us the make, model and year when you call. We will check compatibility and quote the Ghost 2 or Ghost 3 unit that actually suits the vehicle, rather than promising a model we cannot fit.


What a Ghost immobiliser is designed to stop

People look up a Ghost immobiliser, a Ghost 2 immobiliser or Autowatch Ghost when they want protection against modern theft methods, not just a steering lock.

The system is designed to help protect against:

  • Key cloning
  • Relay theft (where a thief extends the signal from a key inside the house)
  • A stolen or borrowed key being used to drive the vehicle
  • Typical OBD-port or diagnostic-tool attacks that try to bypass factory security

If someone has the key, they still should not be able to drive the vehicle without your sequence. Official product information from Dynamco (Ghost Australia) and Autowatch describes Ghost as a covert CAN-bus immobiliser for that reason. No immobiliser is a guarantee against every form of theft — a vehicle can still be loaded or towed — but the aim is that it cannot be driven away without the sequence.


Service / valet mode and emergency code

Service / valet mode temporarily suspends the need to enter your PIN so a workshop, dealership or valet can drive the vehicle without being told the sequence, and without being shown that a Ghost has been fitted. You turn this mode on yourself before you hand the vehicle over, and you turn it off again when you collect it.

If the sequence is forgotten, or a button used for the PIN stops working, the unique emergency code can get you moving again and start a new sequence. We will show you how both of those work when the job is finished.


Ghost immobiliser supply and professional installation in Warana

Tell us the make, model and year when you call. Compatibility is not the same on every vehicle, so we check that first and then quote the Ghost 2 or Ghost 3 unit and the install together.

The install is done at 1/30 Technology Drive, Warana. The module is fitted out of sight and the PIN is set up on buttons already in the vehicle. We will walk you through daily use, service / valet mode and the emergency code before you leave.

How long the vehicle needs to stay with us depends on the vehicle and the unit. We will confirm that when we quote. Workshop hours are Monday–Friday, 7:00am–3:00pm. Phones are answered 7:00am–6:00pm on 07 5208 9307 (0752089307).

Placeholder image of a technician working under a car dashboard during a covert immobiliser installation
BMC Auto Electrical technicians working on a vehicle at the Warana, Sunshine Coast workshop

Why choose BMC for a Ghost immobiliser on the Sunshine Coast

If you are searching for Ghost immobiliser installers near me, or a Ghost immobiliser installer on the Sunshine Coast, this is a Warana workshop with more than 20 years of auto electrical work behind it — not a mobile-only drop-in.

  • Workshop at 1/30 Technology Drive, Warana, with the vehicle up on the hoist when the job needs it
  • Experience across cars, 4WDs, utes, trucks and other vehicles we already look after
  • The related electrical work sits in the same workshop, including auto electrical repairs, diagnostics, cameras, lighting and DVR and other accessories

Sunshine Coast service area

Drop the vehicle to 1/30 Technology Drive, Warana QLD 4575. Customers regularly come from Warana, Kawana, Caloundra, Mooloolaba, Maroochydore, Buderim, Sippy Downs, Nambour, Coolum, Noosa and surrounding Sunshine Coast suburbs, and from further across Queensland when the job is booked in. Workshop hours are Monday–Friday, 7:00am–3:00pm. Phones are answered 7:00am–6:00pm.


Ghost immobiliser cost and common questions

What is a Ghost immobiliser?

A Ghost immobiliser (including Autowatch Ghost, Ghost 2 / Ghost II and Ghost 3 / Ghost III) is a covert aftermarket CAN-bus immobiliser. It does not use a visible PIN pad. You unlock it with a sequence entered on buttons already in the vehicle.

What is the difference between Ghost 2 and Ghost 3?

Ghost 2 (Ghost II) is a single-CAN system for a wide range of vehicles. Ghost 3 (Ghost III) adds high-speed CAN-FD support and dual CAN networks, which some newer vehicles need. We confirm which unit suits your make, model and year before we quote.

Will a Ghost immobiliser stop relay theft or a cloned key?

That is what the system is designed for. Even if someone has, copies or extends the key signal, the vehicle should not drive without your sequence. It is not a claim that a vehicle can never be stolen by other means, such as being towed.

Do I need extra remotes or a keypad?

Not for a standard PIN install. The point of the Ghost is that it uses existing vehicle buttons and does not add a fob or a pad on the dash. A commercial or optional fob / phone setup exists on some installs; if that is relevant to your vehicle we will talk it through, because adding a fob changes the security trade-off.

Is my car compatible with a Ghost 2 or Ghost 3 immobiliser?

Many cars, 4WDs and utes are, but it depends on the make, model and year. Call 07 5208 9307 (0752089307) with those details. Some newer vehicles need Ghost 3 rather than Ghost 2.

How much does a Ghost immobiliser cost?

The cost depends on your vehicle and whether Ghost 2 or Ghost 3 is the right unit, because compatibility and fitting time are not the same on every make and model. We do not publish a one-size Ghost immobiliser price on this page. Call 07 5208 9307 (0752089307) with the make, model and year and we will quote the supply and professional installation.

Do you install Ghost immobilisers near me on the Sunshine Coast?

Yes. Installs are done at BMC Auto Electrical, 1/30 Technology Drive, Warana QLD 4575, for customers across the Sunshine Coast. Call 07 5208 9307 (0752089307) to check the vehicle and book.

How long does the install take?

It depends on the vehicle. We will confirm how long to leave it with us when we quote. Installs are done at the Warana workshop, Monday–Friday, 7:00am–3:00pm.

What if I need the car serviced or valet parked?

Use service / valet mode so the vehicle can be driven without sharing your PIN. We will show you how to turn it on and off.

What if I forget my PIN?

Every unit has a unique emergency code. Keep that code safe and separate from the vehicle. We will explain how to use it when the install is finished.

Where is the workshop?

BMC Auto Electrical, 1/30 Technology Drive, Warana QLD 4575. Workshop Monday–Friday, 7:00am–3:00pm. Phones 7:00am–6:00pm. Call 07 5208 9307 (0752089307) or email [email protected].


Visit BMC in Warana

You can also reach us through the contact page, or book a related electrical job through our Services page.

Local Sunshine Coast workshop

BMC Auto Electrical
1/30 Technology Drive
Warana QLD 4575

Monday–Friday, 7:00am–3:00pm
07 5208 9307
[email protected]

Ask about a Ghost 2 or Ghost 3 immobiliser: 07 5208 9307 (0752089307)

1/30 Technology Drive, Warana QLD 4575 · [email protected]